Tips on Setting Up Fish Tank Aquariums

There are many different sizes and styles to fish tank aquariums.

There are small basic aquariums that are in the ten gallon capacity, up to massive ones that require special bases in order to support the heavy weight of the tank, the water, and all the accessories needed to support happy and healthy fish. There are also both fresh as well as salt water ones. Here are some tips to help you set up smaller aquariums that can be applied to larger sizes as well.

Fish tank aquariums have some basic components for operation. There is the tank itself, a base insert to help the aeration of water work better, gravel, and the aerator and filter. There is a pump that makes air flow into the tank, providing much needed oxygen for your fish to live. You will also need a tank heater, especially in colder climates. Then you have your tank decorations and fish pet supplies, such as food, PH testing kits, and cleaning tools.

When setting up fish tank aquariums, the first step is to find an appropriate location. A gallon of water weighs around seven pounds by itself, so if you have a ten gallon aquarium the weight is about 70 pounds. This also doesn't include the tank and everything else, so let's say that the total weight for an average small aquarium is going to be about 100 pounds. You have to make sure that you place your tank somewhere sturdy, some flimsy end table just won't do.

The next step in the process is to clean the tank, gravel and any decorations you are going to include in non soapy water. This is basically to rinse off any debris from the gravel, or film from the tank itself, so these are sterile right at the start. Many people forget or skip this process, only to wonder why their tank water is cloudy when they have brand new supplies.

The next step to setting up fish tank aquariums is setting up the filter system. Make sure that you read the instructions in the owner's manual carefully. If you don't, your system may not work properly, or at all, and you'll have to start all over again. Then, when this is set up, add the clean gravel. The gravel ratio is about 1 pound of gravel to each gallon your tank is. You will need to smooth out the gravel evenly along the bottom of the tank, making sure that it completely covers the floor. Then you can add you plants and decorations, securing them in the gravel.

When you are sure about your placement, then your fish tank aquarium is ready for water. Before you use tap water from the sink which has chemicals in it, you should consult with your pet supply store about water conditioners you might need, especially for tropical fish. Then you fill the tank slowly, so the gravel and decoration are disturbed, about one to two inches from the top of the tank.

When your fish tank aquariums are full, then you start the filtration system, ad your thermometer and heater and wait. Let it all run for 24 hours minimum before adding your fish, to make sure that the conditioner is working, the water is at the right temperature, and everything is functioning properly, then you are ready to add your fish.

It really is that easy to set up fish tank aquariums. Once everything is set up, you just need to make sure you maintain the clarity of the water in the tank to keep the fish healthy for years to come.

Here is a good source for finding fish tank aquariums.